-
The first to the market for the new models! Cover those exposed OEM ignition wire guards with a light weight but strong 3D Printed Carbon Fiber guard. Ride knowing you are protected and continue to ride day to day! KTM 250/350 SX-F/XC-F 2023 - 2025 HUSQ 250/350 FC/FX 2023 - 2025 GasGas EX250F / EX350F 2023 - 2025
-
Just clean that filter? Looking for the closest spot to sit it probably. Snag up one or multiple of these! These air filter holders are flexible to snag all different sizes of filters and hang on your bars, peg, or anywhere else it fits for you! A must have for any offroad rider and racer. Filter maintenance and dry filters are a must have. Fitment: All Bikes Colors: Red, Green, Blue, Orange, and Black
-
Out of stockTime to pressure wash that rig? Make sure you get all of the dust and dirt our of that airbox without worrying about the dirt, water or chemicals making it into the motor! REV3D is now offering our line of airbox covers for the weekend warriors all the way to the pros! * Comes in RED* Fitment: Bike Model Year
KTM 85SX 18-24
HQV 85SX 18-24
Gasgas 85SX 18-24
-
Out of stockTime to pressure wash that rig? Make sure you get all of the dust and dirt our of that airbox without worrying about the dirt, water or chemicals making it into the motor! REV3D is now offering our line of airbox covers for the weekend warriors all the way to the pros! *Comes in RED*
-
The REV3D CARBON Case Saver for the KTM/GASGAS/HUSQVARNA 50 is a carbon fiber infused Case Saver kit engineered to save your case from damage caused by a chain break. Our case savers are lighter than any case saver on the market as well as engineered to save your case in more ways than one. Also, you will notice our case saver includes a guide on the underside to push mud off of the chain before getting packed in the front sprocket.
-
The REV3D Carbon Fiber Case Saver for the KTM/GASGAS/HUSQVARNA 65 is a carbon fiber infused case saver kit engineered to save your case from damage caused by a chain break! Fitment: • 2009 - 2025 KTM/HUSQVARNA 65 • 2021 - 2025 GASGAS 65
-
The REV3D Carbon fiber case saver for the KTM/GASGAS/HUSQVARNA 85 is a carbon fiber infused Case Saver kit engineered to save your case from damage caused by a chain break. Our case savers are lighter than any case saver on the market as well as engineered to save your case in more ways than one. The current market case savers are sometimes TOO strong and in fact don’t save your case completely. Seen many times are the case saver mounting holes broken due to the case saver being actually stronger than the actual case. Our case saver is engineered to do exactly what it states, save the case!
-
Stand out from the crowd with our custom Carbon fiber infused brake and/or clutch lever bar mounts. All mounts come standard in our Onyx Black with the selection of anodized aluminum gold, blue, red, orange or titanium hardware. Please Allow 1-2 weeks lead time before order shipment for Titanium hardware.
-
Get more power out of your KTM/GASGAS/Husqvarna 85 or 105 with our carburetor intake spacer kit!
-
Get more low-end power out of your KTM/GASGAS/HUSQVARNA 50 or 65 with our carburetor intake spacer kit!
-
Stand out from the crowd with our KTM/GASGAS/HUSQVARNA 85 with our carbon fiber infused OE front caliper spacer! Please allow 5-7 business days for titanium hardware to ship.
-
Use our carbon fiber infused caliper spacer to run the 21mm larger front rotor!
-
Protect your battery with our wash plug coupled with an O-Ring to seal the surface from allowing water or dirt to enter battery when pressure washing your bike after riding!
-
Our Ebike case savers come with the OEM PN bearings and we wanted to offer replacement bearings since we already have them! Sold in a set of TWO. One for the sprocket side and the other for the case saver side. Models Years Gas Gas MC-E 5 2021 to Present Husqvarna EE 5 2020 to Present KTM SX-E 5 2020 to Present
-
Washing that ride is important to keeping that fresh and clean look as well as keeping that machine operating like the day it rolled off the floor! We now are offering the first ever 3D printed exhaust plug. It is a flexible rubber like material that flexes and conforms to the exhaust opening. It also comes with a "Remove Before Flight" keychain as REV3D comes from the aerospace industry, so it is a must have! Sizes Mini Bikes/2 Strokes: PW 50 - 85cc and 2 Stroke Big Bikes 4 Stroke: 250cc - 450cc
-
Our selection of threaded oil funnels come in a variety of colors and thread sizes for a multitude of brands and models. Our funnels are made with a chemical resistant material. Actual colors may vary. Add the “Funnel Buddy” to any funnel order for a place to store your funnel when not in use. It includes a funnel holder, a catch bottle that threads into the base of the holder that comes with a lid that sits on the funnel holder. Fitment: M16 x 2: Honda 250/450 (Red) M18 x 1.5: Kawasaki 450 (Green) M20 x 2.5: Suzuki/Yamaha 250/450 (Blue) M20 x 2.5: Triumph 250 (Yellow) M24 x 3.0: KTM OEM PN 79430020033 (KTM, Husqvarna, GASGAS) (Orange)
-
Our all new flexible rubber bolt holder! This is perfect for anyone who spins wrenches on their things. Whether that is a dirt bike, side by side or even your car, the FlexTray is a must have. Made out of a flexible TPU material has a tight interface to hold your bolt right in place. The FlexTray currently will hold M6 through M12 Hardware. Current Color Options: Black Clear Blue More to come!
-
Working on your bike and need a place to put your forks without having to lay them on the floor or in the way somewhere else? The risk of damage is high, so we have come up with our wall mounted fork holder. 3 screw holes for wall mounting. *Not recommended for use while traveling*
-
Air always seems to stay trapped and we find always seem to find it during the race with those sponge like front brakes. Put our front brake compressor on before and between races to keep trapped air up top and away from your front caliper! Available in a variety of colors. Fitment: One Size Fits All
-
Our funnel buddy is a great addition to your EZ-Pour Threaded Funnel purchase or the funnel you may already have! It provides easy storage while your funnel is not in use and collects residual fluid which drips into the bottle and can be used on your next maintenance or discarded. The Funnel Buddy includes a funnel holder, a catch bottle that threads into the base of the holder, and a lid for the bottle that can be stored on the funnel buddy for easy access.
-
Out of stockReplace that power restricting filter screen with a carbon fiber filter cage! More air equals more power and is direct replacement for your OEM filter support! Expect to feel more throttle response in the bottom to mid range. The more responsive pull is predictable and often what everyone was expecting from this new unit. DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY Due to the intended use of high performance products, REV3D LLC. (“REV3D”) products and each part thereof, are sold “AS IS” and with all faults. To the fullest extent allowed by law, REV3D Products makes NO written, oral, expressed, or implied statement of warranty or guarantee on any product or part sold. REV3D will not be liable for any direct, indirect, incidental, consequential, or special damages, including but not limited to, damage, injury, loss of life, loss of property or equipment, loss of profits or revenue, or claims from any individual or entity arising from the use of any REV3D product. RACING IS A DANGEROUS ACTIVITY AND PURCHASERS OF REV3D PRODUCTS ACKNOWLEDGE THE INHERENT RISKS ASSOCIATED. REV3D MAKES NO REPRESENTATIONS THAT ITS PRODUCTS CAN REDUCE OR ELIMINATE ANY SUCH RISK. REV3D products are NOT FOR STREET, HIGHWAY, OR AIRCRAFT USE and are intended ONLY for race vehicles operated on closed-course facilities or race tracks. REV3D products could be combined with other products or parts which may not be suitable and could adversely affect performance of other race parts or the vehicle. The user shall determine the ultimate suitability and safety of the product for its intended use, and the user assumes all responsibility and risk in connection therewith.
-
That stock bracket break on you again? Instead of buying the OEM bracket and tank every time, replace your broken bracket with our Carbon Fiber Infused bracket that is built stronger and never out of stock! Reuse OEM grommets. Replaces KTM OEM PN 45238061133. Does not come with grommets, hardware or oil tank.
-
Interested in fist fighting your radiator cap on your 2023+ KTM/GASGAS/HUSQVARNA 125 and up while taking it off? If not, you haven't tried yet! The must have tool if you have one of these bikes to make your life so much easier.
-
Raiser the handlebars on your KTM/Husqvarna/GasGas 50/65/85 by 5mm or 10mm with this easy to install riser kit! Colors may vary slightly based on material availability.
-
Replace the prone to lose “Dog Bone” on your KTM/GASGAS/Husqvarna 50 and Ebike without having to wait on backordered parts or having to pay $30. Quick installation and get yourself out of a pinch on race day. Comes in a pack of 5!
-
Dress up your bike and look different from everyone else with our custom color selection of rear brake line guides for the KTM/GASGAS/HUSQVARNA 50's and Ebikes. Easy to install and reuses OEM hardware. Colors may vary slightly based on material availability.
-
Dress up your bike and look different from everyone else with our custom color selection of rear brake line guides for the KTM/GASGAS/HUSQVARNA 65, 85 and 105. Easy to install and reuses OEM hardware. Colors may vary slightly based on material availability.
-
Tired of fighting that OEM seat latch on your 50 or 65? We were too! So we decided to begin offering our carbon fiber infused seat latch kit that utilizes Anodized Aluminum Probolt hardware to connect to the new threaded base. No drilling or modification required! Just remove the OEM and replace with the REV3D Seat Latch Kit! Color: Black Carbon Fiber Infused Material with your choice of Orange, Red, Black, Gold or Blue hardware! Fitment KTM/Husqvarna 50/65 Years 2009-2025 GasGas 50/65 2021-2025 All E3/E5 GasGas/Husqvarna/KTM years
-
No one wants to provide the little rippers a way to spice up their E5 so we figured we would! Change the color of those boring black louvers to whatever color you see fit! These are a direct replacement of your OEM louvers. Fitment: 2020-2024 KTM/GASGAS/HUSQVARNA E5's Colors: Red, HUSQ Blue, Orange, Custom Custom Colors available. Please add note during checkout of color you would like and we will reach out. Added turnaround time should be expected for custom colors! *Must loosen battery to install! Do not try to force the left louver in without loosening as it include the wire guide!*
-
Out of stockBurn through another swingarm guard again? Sick of waiting on inventory and overpaying for it to not last an entire season? We are now offering a carbon fiber infused plastic swingarm chain slider to last longer than the standard TPU material currently used in the market. Lighter and stronger! Fitment: KTM 85/105 SX
-
We developed the first ever carbon fiber case saver for the KTM Group E5's! This case saver utilizes OEM bearing part number and comes installed on the case saver. The best part though, the mud diffuser built in the case saver to push incoming mud off of the chain on its way into the front sprocket. As you may know, the mud can become packed around the front sprocket causing the bike to overheat or even lock the motor up from spinning. This case saver helps prevent that from happening! **THIS PART IS NOT LEGAL FOR AMA SANCTIONED EVENTS**
-
These digital gift cards are the perfect gift for the offroad enthusiasts in your life. Upon purchase, a digital code will be emailed to the recipient.
-
Add the perfect grip to your levers with REV3D’s Ripper Grips! This rubberized grip material is made of polyolefin that shrinks to meet the contour of your lever! The material is very thin and does not feel bulky under your fingers but gives you the grip you need in ALL conditions.
-
Introducing our SPRAYCADDY! Hold those chemicals in your garage, shop, trailer or wherever you maintain those units! Holds 2 Spray Cans ( I.E. Chain Lube, Filter Spray) and also 3 Spray Bottles (Simple Green, Cleaners, ETC) Clean and convenient for your offroad maintenance!
-
Don't Tippy Toe! Stand tall finally and lock in those starts. No more excuses! Standard offering are 5" Tall. We do offer custom sizes! Please use the contact form on our site for custom sizes! Custom Colors are an additional chard ad have extended lead times. We will contact you after order if you select "Custom Color" Light starting blocks that include your number in multiple colors. Colors: White Black Red Blue Green Grey Yellow Orange Custom Color
-
The adjuster knobs on your WP Forks break again? This common problem can be a real pain to deal with and hard to find replacements. We offer these in a 5 pack and red in color. Mounts up to all WP Forks including the Triangle/Three prong knobs.
